THE COMPANY

  • Releco was founded in 1962 by Mr. Santiago Lozano, who is still the company's president and principal owner.
  • Export activities started in 1972 and today, represents approximately 80% of total production.
  • Currently we are a team of more than 200 people, with an installation of 4.000 m² in Alcorc¨®n (Madrid) and we sell more than 5 million relays all over the world.

POSITIONING

  • Here, at RELECO , we believe that our positioning must be focused on the design and production of innovative and high quality products, which provide creative solutions to the lacks of the available options on the market.
  • Our strong relationship with our distributors and the international presence have allowed us to detect the problems and necessities of thousands of end users.
  • The solutions proposed by RELECO have consolidated RELECO's position on the market, making the company one of the world's leading plug-in industrial relays manufacturer.
  • So, in conclusion, our wish is to continue focusing our attenyion on what we are specialists, "To provide creative and original solutions that continue to allow us to differentiate our products from others on
    the market".

DISTRIBUTION

  • RELECO is establishing a long-term collaboration with qualified distributors who have widespread knowledge of each market's potential and needs.
  • This collaboration has been a determining factor in the development and philosophy of our company.
  • As a result: ...The IDM System. Entering the market.
  • The first "full featured relay" which makes your job:
    • Faster
    • Easier
    • Safer
    • More practical
    • More economic
Since the seventies, RELECO has continued innovating and focusing on new products and designs which continually improve the performance of our relays for the most sophisticated applications.

PRODUCTION

  • Our high integration level, gives complete control "from design to sell". This allows us ( alaways after consultation), to produce big series, as well as, relays, with special specifications for the most sophisticated application which demand smaller amounts, being the only international company, who can offer you this option, ensuring you the same quality level ast the one offered for our standard roducts.
  • The vertical production system applied results in one of our most remarkable competitive advantages and is a very important additional value for you.
    • Technical Office - CAD
    • Laboratory - test, approvals, quality
    • Moulding - Electroerosion
    • Tooling - Reheating - Plated coating
    • Plastic Injection
    • Coil Assembling
    • Plate Assembling
    • Assembling lines
    • Final adjustment by testing 8 critical parameters for every relay

All the production process is controlled by our engineers, to meet the strictest demands and expectations.

CODE CONTACTS TERMINAL DESCRIPTION
C2-A20¡­ 2 tubular 8 pins  General purpose. Change-over contacts, 10A
C2-T21¡­ 2 tubular 8 pins  Low level signal. Change-over bifurcated contacts. M¨ªn. 1mA @ 5V
C2-G20¡­ 2 tubular 8 pins  General purpose DC. Open contacts, 0.4A @ 220V DC1
C3-A30¡­ 3 tubular 11 pins  General purpose. Change-over contacts, 10A
C3-T31¡­ 3 tubular 11 pins  Low level signal. Change-over bifurcated contacts. M¨ªn. 1mA @ DC5V
C3-G30¡­ 3 tubular 11 pins  General purpose DC. Open contacts, 0.4A @ 220V DC1
C3-X10¡­ 1 tubular 11 pins  Power relay DC. Normally open, double make contact, 0.3A @ 220V DC13
C3-M10¡­ 1 tubular 11 pins  Power relay DC.Open, double make contact, magnetic blow out 2A @ 220V DC13
C3-R20¡­ 2 tubular 11 pins  Latching (remanence) relay. Change-over contacts, 10A
C3-S14¡­ 1 tubular 11 pins  Sensitive relay (250 mW). Change-over contact, 6A. Operating range: 0,8¡­1,4xUn
C3-E24¡­ 2 tubular 11 pins  Sensitive relay (500 mW). Change-over contacts, 6A. Operating range: 0,8¡­1,7xUn
C3-N34¡­ 3 tubular 11 pins  Sensitive relay (800 mW). Change-over contacts, 6A. Operating range: 0,8¡­1,4xUn
C4-A40¡­ 4 faston  General purpose. Change-over contacts, 10A
C4-X20¡­ 2 faston  Power relay DC. Normally open, double make contact, 0.3A @ 220V DC13
C4-R30¡­ 3 faston  Latching (remanence) relay. Change-over contacts, 10A
C5-A20¡­ 2 faston  General purpose. Change-over contacts, 16A
C5-A30¡­ 3 faston  General purpose. Change-over contacts, 16A
C5-G30¡­ 3 faston  General purpose DC. Open contacts, 0.4A @ 220V DC1
C5-X10¡­ 1 faston  Power relay DC. Normally open, double make contact, 0.3A @ 220V DC13
C5-M10¡­ 1 faston  Power relay DC. Normally open, double make contact, 2A @ 220V DC13
C5-R20¡­ 2 faston  Latching (remanence) relay. Change-over contacts, 10A
C7-A20¡­ 2 faston  Miniature, power relay. General purpose. Change-over contacts, 10A
C7-T21¡­ 2 faston  Miniature, power relay. Low level. Change-over bifurcated contacts. M¨ªn. 1mA @ DC5V
C7-A10¡­ 1 faston  Miniature, power relay. General purpose. Change-over contacts, 16A
C7-G20¡­ 2 faston  Miniature, power relay, DC. Open contacts, 0.3A @ 110V DC13
C7-X10¡­ 1 faston  Miniature, power relay, DC. Normally open, double make contact, 0.3A @ 220V DC13
C7-W10¡­ 1 faston  High inrush current (lamp switching). Wolfram and silver contacts. 6A @ 250V AC5a/b
C9-A41¡­ 4 faston  Miniature relay. General purpose. Change-over contacts, 5A
C9-E21¡­ 2 faston  Sensitive, miniature relay (500 mW). Change-over contacts, 5A
C9-R21¡­ 2 faston  Latching (remanence) miniature relay. Change-over contacts, 5A
C10-A10¡­ 1 faston  Input/output PLC application, general purpose. Change-over contact
C10-T13¡­ 1 faston  Input/output PLC application, low level signal. Change-over contact
R3-N34¡­ 3 tubular 11 pins  Railway applications according to IEC 60077. Operating range: 0,8¡­1,4xUn